[1]石 慧,王 洋,马汀山,等.多机组、多模式的热电联产厂级供热优化[J].热力发电,2022,51(01):123-129.[doi:10.19666/j.rlfd.202107132]
 SHI Hui,WANG Yang,MA Tingshan,et al.Plant-level heating optimization for multi-unit and multi-mode cogeneration[J].Thermal Power Generation,2022,51(01):123-129.[doi:10.19666/j.rlfd.202107132]
点击复制

多机组、多模式的热电联产厂级供热优化

参考文献/References:

[1] 邵成成, 冯陈佳, 傅旭, 等. 多能源电力系统生产模拟: 现状与挑战[J]. 中国电机工程学报, 2021, 41(6): 2029-2040.
SHAO Chengcheng, FENG Chenjia, FU Xu, et al. Multi energy power system production simulation: state of arts and challenges[J]. Proceedings of the CSEE, 2021, 41(6): 2029-2040.
[2] 王金星. 大型燃煤热电联产系统研究现状和展望[J]. 华北电力大学学报(自然科学版), 2019, 46(6): 90-98.
WANG Jinxing. Research status and prospect for large coal-fired combined heat and power generation system[J]. Journal of North China Electric Power University (Natural Science Edition), 2019, 46(6): 90-98.
[3] 居文平, 吕凯, 马汀山, 等. 供热机组热电解耦技术对比[J]. 热力发电, 2018, 47(9): 115-121.
JU Wenping, LYU Kai, MA Tingshan, et al. Comparison of thermo-electric decoupling techniques for heating units[J]. Thermal Power Generation, 2018, 47(9): 115-121.
[4] 叶向东, 赵贺, 罗发青, 等. 一种切除低压缸进汽的供热系统: CN201720604399.3[P]. 2018-01-02[2021-07-10].
YE Xiangdong, ZHAO He, LUO Faqing, et al. A heating system for removing the inlet of the low pressure cylinder: CN201720604399.3[P]. 2018-01-02[2021-07-10].
[5] 王智, 郭良丹, 付静, 等. 供热系统加储热后的调峰灵活性分析[J]. 汽轮机技术, 2019, 61(4): 311-314.
WANG Zhi, GUO Liangdan, FU Jing, et al.Analysis of peak shaving flexibility in heating system after installing heat storage[J]. Turbine Technology, 2019, 61(4): 311-314.
[6] 叶涛. 热力发电厂[M]. 3 版. 北京: 中国电力出版社, 2009: 19-21.
YE Tao. Thermal power stations[M]. 3rd ed. Beijing: China Electric Power Press, 2009: 19-21.
[7] 陈媛媛, 周克毅, 李代智, 等. 等效焓降法在大型机组抽汽供热的热经济性分析中的应用[J]. 汽轮机技术, 2009, 51(6): 410-412.
CHEN Yuanyuan, ZHOU Keyi, LI Daizhi, et al. Application of equivalent enthalpy method in thermal economic analysis of steam extraction of large units[J]. Turbine Technology, 2009, 51(6): 410-412.
[8] 张晓辉. 热电冷联产系统经济性诊断方法研究[J]. 中国电机工程学报, 2009, 29(11): 8-13.
ZHANG Xiaohui. Research on economic diagnosis method of thermo-electric cooling cogeneration system[J]. Proceedings of the CSEE, 2009, 29(11): 8-13.
[9] 徐曙, 曹赛. 复杂热力循环等效焓降法计算通式[J]. 汽轮机技术, 2017, 59(1): 17-20.
XU Shu, CAO Sai. General formula for calculating the equivalent thermodynamic cycle of complex thermody-namic cycles[J]. Turbine Technology, 2017, 59(1): 17-20.
[10] 许朋江, 徐睿, 邓佳, 等. 330 MW机组采暖抽汽对发电热经济性的影响分析[J]. 中国电机工程学报, 2020, 40(19): 6257-6263.
XU Pengjiang, XU Rui, DENG Jia, et al. Analysis of the influence of heating steam extraction of 330 MW unit on the economy of electric generation[J]. Proceedings of the CSEE, 2020, 40(19): 6257-6263.
[11] 张军辉, 杜献伟, 张文涛. 300 MW 纯凝机组供热改造经济性分析[J]. 发电技术, 2019, 40(1): 71-73.
ZHANG Junhui, DU Xianwei, ZHANG Wentao. Economic analysis of heating reform of 300 MW condensing power plant[J]. Power Generation Technology, 2019, 40(1): 71-73.
[12] 杨志平, 时斌, 李晓恩, 等. 热负荷分配比例对抽凝-背压供热机组能耗影响[J]. 化工进展, 2018, 37(3): 875-883.
YANG Zhiping, SHI Bin, LI Xiaoen, et al. Impacts of heat load distribution ratio on energy consumption of extraction steam-high back pressure heating cogeneration unit[J]. Chemical Industry and Engineering Progress, 2018, 37(3): 875-883.
[13] 王春光, 朱国栋. “以热定电”背景下热电联产机组优化分配热负荷的研究[J]. 能源与节能, 2021(3): 63-66.
WANG Chunguang, ZHU Guodong. Study on optimal distribution of heat load for cogeneration units under background of “determining power by heat”[J]. Energy and Conservation, 2021(3): 63-66.
[14] 杨利, 刘永林, 房伟, 等. 配置储热罐后热电联产机组运行优化[J]. 热力发电, 2020, 49(4): 70-76.
YANG Li, LIU Yonglin, FANG Wei, et al. Operation optimization of cogeneration unit equipped with heat accumulator[J]. Thermal Power Generation, 2020, 49(4): 70-76.
[15] 梁占伟, 张磊, 徐亚涛, 等.双机联调抽汽-高背压联合供热分析与优化[J]. 动力工程学报, 2020, 40(3): 247-254.
LIANG Zhanwei, ZHANG Lei, XU Yatao, et al. Energy analysis and optimization of steam extraction-high back pressure combined heating for dual cogeneration units[J]. Journal of Chinese Society of Power Engineering, 2020, 40(3): 247-254.
[16] 宫卫平, 管洪军, 李宏伟, 等. 基于EBSILON 仿真软件的联机供热负荷分配优化[J].山东大学学报(工学版) , 2021, 51(4): 77-83.
GONG Weiping, GUAN Hongjun, LI Hongwei, et al. Optimization of heating load distribution of combined unit based on EBSILON simulation software[J]. Journal of Shandong University (Engineering Science), 2021, 51(4): 77-83.
[17] 王珊, 刘明, 严俊杰. 采用粒子群算法的热电厂热电负荷分配优化[J]. 西安交通大学学报, 2019, 53(9): 159-166.
WANG Shan, LIU Ming, YAN Junjie. Optimizing heatpower load distribution of thermal power plants based on particle swarm algorithm[J]. Journal of Xi’an Jiaotong University, 2019, 53(9): 159-166.
[18] 骆小满, 皇甫成, 阮江军, 等. 基于神经网络的热电联产机组热负荷和电负荷预测[J]. 热力发电, 2019, 48(9): 46-50.
LUO Xiaoman, HUANG Fucheng, RUAN Jiangjun, et al. Prediction of heat load and electric load of cogeneration unit based on neural network[J]. Thermal Power Generation, 2019, 48(9): 46-50.
[19] 余兴刚, 李旭, 蒋北华, 等. 汽轮机变工况模型的简便建立方法及应用[J]. 热力发电, 2019, 48(2): 96-100.
YU Xinggang, LI Xu, JIANG Beihua, et al. A simple method to construct variable condition model for steam turbine and its application[J]. Thermal Power Generation, 2019, 48(2): 96-100.
[20] 周兰欣, 华敏, 王为, 等. 机组参数与热耗修正曲线的变工况计算法[J]. 动力工程学报, 2011, 31(5): 387-390.
ZHOU Lanxin, HUA Min, WANG Wei, et al. A variable condition calculation method for main steam parameters and the heat rate correction curves[J]. Journal of Chinese Society of Power Engineering, 2011, 31(5): 387-390.
[21] 王惠杰, 张春发, 宋之平. 火电机组运行参数能耗敏感性分析[J]. 中国电机工程学报, 2008, 28(29): 2-10.
WANG Huijie, ZHANG Chunfa, SONG Zhiping. Sensitive analysis of energy consumption of operating parameters for coal-fired unit[J]. Proceedings of the CSEE, 2008, 28(29): 2-10.
[22] 刘振刚, 李太兴, 王俊有, 等. 凝汽机组主蒸汽参数耗差分析方法的研究及其应用[J]. 热力透平, 2008, 37(1): 59-62.
LIU Zhengang, LI Taixing, WANG Junyou, et al. Research and application of energy loss analysis of main steam parameter for condensing steam turbine[J]. Thermal Turbine, 2008, 37(1): 59-62.
[23] 徐大懋, 邓德兵, 王世勇, 等. 汽轮机的特征通流面积及弗留格尔公式改进[J]. 动力工程学报, 2010, 30(7): 473-477.
XU Damao, DENG Debing, WANG Shiyong, et al. Application of characteristic flow area of steam turbines and improvement on Freuger’s formula[J]. Journal of Chinese Society of Power Engineering, 2010, 30(7): 473-477.
[24] 曹丽华, 周云龙, 李勇. 汽轮机通流部分故障诊断基准值的研究[J]. 汽轮机技术, 2009, 51(2): 132-134.
CAO Lihua, ZHOU Yunlong, LI Yong. Study on the norm for fault diagnosis of steam turbine flow passage[J]. Turbine Technology, 2009, 51(2): 132-134.
[25] 李勇, 金国华, 曹祖庆. 弗留格尔公式的证明及应用[J]. 汽轮机技术, 1995, 37(3): 158-162.
LI Yong, JIN Guohua, CAO Zuqing. Proving of Flǜgel formula and its application[J]. Turbine Technology, 1995, 37(3): 158-162.
(责任编辑 刘永强)

备注/Memo

石慧(1990),女,硕士,主要研究方向为电站节能减排与供热优化,shihui@tpri.com.cn。

更新日期/Last Update: 2021-01-15