[1]史志刚,蔡 晖,崔雄华,等.风电机组齿轮箱高速轴断齿原因分析[J].热力发电,2021,50(10):173-178.[doi:10.19666/j.rlfd.202103065 ]
 SHI Zhigang,CAI Hui,CUI Xionghua,et al.Cause analysis for tooth broken in high speed shaft of wind turbine gear box[J].Thermal Power Generation,2021,50(10):173-178.[doi:10.19666/j.rlfd.202103065 ]
点击复制

风电机组齿轮箱高速轴断齿原因分析

参考文献/References:

[1] 王恰. 中国风电产业40年发展成就与展望[J]. 中国能源, 2020, 42(9): 28-32.
WANG Qia. Achievements and prospects of China’s wind power industry development for 40 years[J]. Energy of China, 2020, 42(9): 28-32.
[2] 王炜超, 袁逸萍, 孙文磊, 等. 融合SCADA数据的风电机组齿轮箱状态评估[J]. 机械科学与技术, 2020, 39(2): 201-206.
WANG Weichao, YUAN Yiping, SUN Wenlei, et al. Evaluation of wind turbine gearbox state with fusion of SCADA data[J]. Mechanical Science and Technology for Aerospace Engineering, 2020, 39(2): 201-206.
[3] 李明扬, 蒋媛媛. 考虑煤耗率的火电机组灵活调峰对风电消纳的影响效果研究[J]. 热力发电, 2020, 49(2): 45-51.
LI Mingyang, JIANG Yuanyuan. Effect of flexible load regulation of thermal power units considering coal consumption rate on wind power utilization[J]. Thermal Power Generation, 2020, 49(2): 45-51.
[4] 王辉, 李晓龙, 王罡, 等. 大型风电齿轮箱的失效问题及其设计制造技术的国内外现状分析[J]. 中国机械工程, 2013, 24(11): 1542-1549.
WANG Hui, LI Xiaolong, WANG Gang, et al. Research on failure of wind turbine gearbox and recent development of its design and manufacturing technologies[J]. China Mechanical Engineering, 2013, 24(11): 1542-1549.
[5] 孙群丽, 刘长良, 周瑛. 基于状态曲线的风电机组运行工况异常检测[J]. 热力发电, 2019, 48(7): 110-116.
SUN Qunli, LIU Changliang, ZHOU Ying. Abnormal detection of operation conditions of wind turbine based on state curve[J]. Thermal Power Generation, 2019, 48(7): 110-116.
[6] 宋永乐, 李光福, 陈晓金, 等. 兆瓦级风电齿轮箱齿轮微点蚀分析[J]. 重庆大学学报, 2015, 38(1): 120-125.
SONG Yongle, LI Guangfu, CHEN Xiaojin, et al. Analysis of gear micropitting for megawatt-class wind turbine gearbox[J]. Journal of Chongqing University, 2015, 38(1): 120-125.
[7] 宋金辉, 程小利, 黄敏, 等. 风电齿轮箱高速中间轴失效原因分析[J]. 金属热处理, 2019, 44(9): 89-92.
SONG Jinhui, CHENG Xiaoli, HUANG Min, et al. Failure analysis of the high speed intermediate shaft of wind power gearbox[J]. Heat Treatment of Metals, 2019, 44(9): 89-92.
[8] Case hardening steels: technical delivery conditions: DIN 17210—1986[S]. German Institute for Standardisation, 1986: 5.
[9] 齿轮轮齿磨损和损伤术语: GB/T 3481—1997[S]. 北京: 中国标准出版社, 1997: 3.
Gears-wear and damage to gear teeth-terminology: GB/T 3481—1997[S]. Beijing: Standards Press of China, 1997: 3.
[10] 金属材料拉伸试验 第1部分: 室温试验方法: GB/T 228.1—2010[S]. 北京: 中国标准出版社, 2010: 7.
Metallic materials-tensile testing: part l: method of test at room temperature: GB/T 228. 1—2010[S]. Beijing: Standards Press of China, 2010: 7.
[11] 大型合金结构钢锻件技术条件: JB/T 6396—2006[S]. 北京: 中国标准出版社, 2006: 10.
Specification for the heavy alloy structural steel forgings: JB/T 6396—2006[S]. Beijing: Standards Press of China, 2006: 10.
[12] 金属材料夏比摆锤冲击试验方法: GB/T 229—2007[S]. 北京: 中国标准出版社, 2007: 9.
Metallic materials: charpy pendulum impact test method: GB/T 229—2007[S]. Beijing: Standards Press of China, 2007: 9.
[13] 金属材料维氏硬度试验 第1部分: 试验方法: GB/T 4340.1—2009[S]. 北京: 中国标准出版社, 2009: 5.
Metallic materials vickers hardness test: part 1: test method: GB/T 4340.1—2009[S]. Beijing: Standards Press of China, 2009: 5.
[14] 金属材料硬度值的换算: GB/T 33362—2016[S]. 北京: 中国标准出版社, 2016: 6.
Metallic materials conversion of hardness values: GB/T 33362—2016[S]. Beijing: Standards Press of China, 2016: 6.
[15] 钢件渗碳淬火硬化层深度的测定和校核: GB/T 9450—2005[S]. 北京: 中国标准出版社, 2005: 2.
Steel determination and verification of the depth of carburized and hardened cases: GB/T 9450—2005[S]. Beijing: Standards Press of China, 2005: 2.
[16] 钢件渗碳淬火回火金相检验: GB/T 25744—2010[S]. 北京: 中国标准出版社, 2010: 6.
Metallographic examination for carburizing quenching and tempering of steel parts: GB/T 25744—2010[S]. Beijing: Standards Press of China, 2010: 6.
[17] 赵玉良, 徐鸿钧, 姜永涛. 风电齿轮的微点蚀研究[J]. 能源工程, 2010(4): 41-44.
ZHAO Yuliang, XU Hongjun, JIANG Yongtao. Research on micropitting of gear flanks to wind turbine[J]. Energy Engineering, 2010(4): 41-44.
(责任编辑 杜亚勤)

相似文献/References:

[1]韩修成,郑中甫.MPS212中速磨煤机分离器齿轮箱进粉的处理[J].热力发电,2010,(05):66.
 HAN Xiucheng,ZHENG Zhongfu.DISPOSAL OF PULVERIZED COAL ENTERING INTO GEAR BOX OF THE CLASSIFIER IN MPS212 TYPE MEDIUM SPEED COAL PULVERIZER[J].Thermal Power Generation,2010,(10):66.
[2]孙群丽,刘长良,周 瑛.基于状态曲线的风电机组运行工况异常检测[J].热力发电,2019,(07):110.[doi:10.19666/j.rlfd.201901028 ]
 SUN Qunli,LIU Changliang,ZHOU Ying.Abnormal detection of operation conditions of wind turbine based on state curve[J].Thermal Power Generation,2019,(10):110.[doi:10.19666/j.rlfd.201901028 ]
[3]李颖峰,童 博,韩 斌,等.风电机组刚性塔架共振分析及其控制策略[J].热力发电,2019,(07):122.[doi:10.19666/j.rlfd.201904081 ]
 LI Yingfeng,TONG Bo,HAN Bin,et al.Resonance analysis and control strategy for wind turbine with rigid tower[J].Thermal Power Generation,2019,(10):122.[doi:10.19666/j.rlfd.201904081 ]
[4]崔天依,褚孝国.大转动惯量风电机组变桨控制技术研究[J].热力发电,2020,49(01):55.[doi:10.19666/j.rlfd.201906147 ]
 CUI Tianyi,CHU Xiaoguo.Pitch control technology for wind turbines with large moment of inertia[J].Thermal Power Generation,2020,49(10):55.[doi:10.19666/j.rlfd.201906147 ]
[5]赵鹏程,王剑钊.双馈风力发电机组轴系扭振特性研究[J].热力发电,2020,49(7):35.[doi:10.19666/j.rlfd.201909220 ]
 ZHAO Pengcheng,WANG Jianzhao.Torsional vibration characteristics of double-feed wind turbine shafting[J].Thermal Power Generation,2020,49(10):35.[doi:10.19666/j.rlfd.201909220 ]
[6]罗 涛,李颖峰,赵 勇,等.基于可靠度的风力机部件使用寿命分析[J].热力发电,2021,50(10):150.[doi:10.19666/j.rlfd.202103051 ]
 LUO Tao,LI Yingfeng,ZHAO Yong,et al.Remaining useful life analysis for wind turbine components based on reliability[J].Thermal Power Generation,2021,50(10):150.[doi:10.19666/j.rlfd.202103051 ]

备注/Memo

史志刚(1980),男,正高级工程师,主要研究方向为电站部件的组织性能、失效分析与寿命评估, shizhigang@tpri.com.cn。

更新日期/Last Update: 2021-10-15